108 computer problems

108 computer problems. Asked Questions guide and basic editing

Collection problems that are common to the other computer. The problem is trying to gather and see each other frequently used as a guide for the summary. The initial problem. Hope will be helpful to other people can do.

Problems of Windows

• After the new Setup Windows does not allow the left to continue Setup
Occur for several reasons. But one thing is common to other settings in bios Virus Warning devices can not be made. Write down on the redundancy of the boot record of hard to try to resolve the bios is set to Disable before and after you complete Setup Windows, then set a new Enable.

• After the text to Setup Windows Windows Protection Error
The most common problem is the RAM may be the only office Setup Windows only (by default before running Setup Windows will not be anything) to try RAM to a new view or change if the trial is set in the SDRAM. bios settings from the set of CAS 2 is set to try 3 more may help solve some problems.

• AMD K6II-350 was used to sign into Windows95 and Windows98, but the Error
Be caused by the use of AMD's CPU speed from 350MHz up to Windows95 resolution is to resolve this problem, Download Patch for the AMDK6UPD.EXE to edit this file by running the command then boot the new machine before. Read details here.

Hardware problems

• RAM is missing which added 32 M. Why is that Windows 28 M.
Symptoms of RAM will be lost bullish on the motherboard version of the VGA on board write the truth which is not lost. Only part of the RAM will be used with VGA and size used to catch it may be 2M, 4M or 8M time depending on the setting in BIOS .

• Use a computer to always stay close enough to hang a few moments and then reopen. Is used to recover some, then hangs again
May be caused by the heat too high. First, make sure that fans are any good or not typical, if a machine is Free Over Clock is also slowing down. Use a regular job before that is a problem or is empty if the bios is the view of the CPU heat or the Main Board with the observed values of temperature that is too high or not. May be installed to add or change the CPU fan help with either.

• BIOS ROM CHECK SUM ERROR at start.
This condition mostly caused by the BIOS got out of the negligent or . Try to move coal to tight, if not lost any before it must try to change the charcoal found on the motherboard. (Before change if viewed Meter measures light absorbing), and then after the change to make before the Clear BIOS Jumper Jumper is near IC BIOS That Jump to a 5-second hold, then Jump back to before. After that go to different settings of the new BIOS.

• Forgot your Password BIOS will do good work?
To make charcoal to remove the BIOS from a few minutes and then put back into making new Clear Jumper BIOS before or try to see how the Clear / Reset Password of the BIOS.

• Buy a larger hard drive, but after a Format, and then see just a 2G
First to preview all systems that use FAT16 or FAT32 to FAT16 if you can see just a 2G to a maximum of only 1 Partition need a FAT32 method is to use sheets of Startup Disk WIN98 FDISK to do FDISK (if FDISK from DOS. or WIN95 is a FAT16) see how to fdisk and format the hard disk here.

• Unavailable. Hard disk has more than 8G. Motherboard for old versions.
Caused by the BIOS can not know about. The larger hard drive will be with older motherboard that was found again is a Windows see more than 8G, but not available. Hard to say that our full. How to change first is to try to Update BIOS Version is a new preview (if available) or not is a program for managing hard disk space Download. From the website of the hard drive manufacturer or brand that could use Partition to divide up large 8G to 1 Partition may help.

Software problem

• After signing antivirus McAfee 4.0.3 is unable to boot into Windows.
Times found to occur only on certain machines. Problems caused when we go down then install McAfee Scan machine will enter data on your hard disk by a Batch File in the autoexec.bat file, which sometimes will not allow outstanding issues to enable Windows to change the way to start. into MS-DOS Mode by pressing the F8 key while turning. Will come to the Microsoft Windows 98 Startup Menu menu, select any 6. Sefe mode command prompt only and then use the command "edit autoexec.bat" to edit the file to remove the command line scan.exe out and try to save file. boot device again.